Assembly Overview Of Rear Axle Differential
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Assembly overview of rear axle differential
| 1 | Rear axle differential |
| 2 | Vibration balancer (only on diesel models) |
| 3 | Screws on vibration balancer/rear axle differential > Tightening torque 15 Nm (11 ftlb.) |
| 4 | Screws on rear axle differential/rear axle > Initial tightening 60 Nm (44 ftlb.) > Torque angle 90° |
| 5 | Heat shield on rear axle differential |
| 6 | Screws for heat shield on rear axle differential > Tightening torque 6 Nm (4.5 ftlb.) |
| 7 | Screws for servo motor for rear-differential lock (for allocation, see Parts Information) > Tightening torque 8 Nm (6 ftlb.) |
| 8 | Servo motor for rear-differential lock |
Fig 2: Oil Filler Screw And Oil Drain Plug On Rear Axle Differential Components Location With Torque Specification
Oil filler screw and oil drain plug on rear axle differential
| 1 | Oil filler screw > Tightening torque 35 Nm (26 ftlb.) |
| 2 | Oil drain plug > Tightening torque 35 Nm (26 ftlb.) |