Component Overview Of Atf Cooler, Atf Lines

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: ATF Cooler, ATF Lines Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Component overview of ATF cooler, ATF lines

1	Screw for connection point for ATF lines/transmission > Tightening torque 20 Nm (15 ftlb.)
2	Rear ATF lines
3	Screw for ATF lines/transmission > Tightening torque 8 Nm (6 ftlb.)
4-9	Only for vehicles with I-no. A8F or A8H with 0K0
4	ATF cooler
5	Screw for thermostat/radiator assembly > Tightening torque 8 Nm (6 ftlb.)
6	Screw for ATF lines/thermostat > Tightening torque 8 Nm (6 ftlb.)
7	Front ATF lines
8	Screws for decoupling elements/front-axle support > Tightening torque 6 Nm (4.5 ftlb.)
9	Holder for ATF lines
10	Screws for holder for ATF lines or heat exchanger/front-axle support > Tightening torque 8 Nm (6 ftlb.)
11	ATF cooler (heat exchanger) Only for vehicles with I-no. A8C or A8H with 0K3