Oil Pan

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Pan Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil pan

1	Screws, M6 x 18/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°
2	Oil pan
3	Oil intake tube
4	Screw with sleeve, M6 x 26 > Initial tightening 8 Nm (6 ftlb.) > Final tightening + 90°
5	Screw, M6 x 16 > Tightening torque 9 Nm (6.5 ftlb.)
6	Shaft cover
7	Oil guide housing
8	Dowel sleeves
9	Oil pump sprocket
10	Screw, M8 x 22/replace > Initial tightening 20 Nm (15 ftlb.) > Final tightening + 90°
11	Screw, M6 x 18 and M6 x 30/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90° > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°
12	Oil windage tray
13	Screw
14	Screw
15	Seal/replace
16	Oil pump
17	Screw, M6 x 60/replace > Initial tightening 8 Nm (6 ftlb.) > Final tightening + 90°
18	Screw, M6 x 22/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°
19	O-ring/replace
20	Sealing ring/replace
21	Oil drain plug, M14 x 1.5 > Tightening torque 30 Nm (22 ftlb.)
22	Sealing ring/replace
23	Oil level sensor
24	Screws M6 x 25/replace > Tightening torque 9 Nm (6.5 ftlb.)
25	Screws, M6 x 25/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°
26	Screws, M6 x 25/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°

Fig 2: Oil Pump Guide Rail Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws on guide rail for oil pump

3	Screw > Tightening torque 9 Nm (6.5 ftlb.)
4	Screw > Tightening torque 9 Nm (6.5 ftlb.)