Chain Housing Cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lower Chain Housing Cover Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lower chain housing cover

1	Lower chain housing cover
2	Sealing ring/replace > Press-in depth 0 mm + 0 mm - 0.2 mm
3	Screw, M6 x 25/replace > Initial tightening 3 Nm (2 ftlb.) > Final tightening + 90°
4	Dowel sleeve
5	Chain housing cover on cylinder bank 1
6	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
7	Chain housing cover on cylinder bank 2
8	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
9	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
10	Solenoid valve for camshaft control
11	Screw, M6 x 18 > Tightening torque 9 Nm (6.5 ftlb.)
12	Heat shield on solenoid valve
13	M6 nut > Tightening torque 9 Nm (6.5 ftlb.)
14	Screw, M6 x 22 > Tightening torque 9 Nm (6.5 ftlb.)
15	Sealing ring, replace