LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (1X - Engine - General 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 1X00IN Technical Values (V6 Turbo) >> Group 13 - Engine - Crank Drive, Pistons >> Balance Shaft

Balance Shaft

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Balance Shaft Bracing Wheel Components Location With Torque Specification
G15823369Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Balance shaft bracing wheel

1  Balance shaft bracing wheel
2  Screw for balance shaft bracing wheel/replace > Initial tightening 40 Nm (30 ftlb.)  > Torque angle  + 45°
Fig 2: Balance Weight Screw Components Location With Torque Specification
G15823370Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Balance weight screw

1  Screw for balance weight/replace > Initial tightening 40 Nm (30 ftlb.)  > Torque angle  + 90°
2  Balance weight
Fig 3: Balance Shaft End Plate Components Location With Torque Specification
G15823371Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Balance shaft end plate

1  Screws for balance shaft end plate > Tightening torque 9 Nm (6.5 ftlb.) 
2  Balance shaft end plate
3  Balance shaft
4  Thrust washer