Torque Support

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Support Components Location With Torque Specification (V8 Turbo)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Torque support (shown on V8 Turbo)

1	Torque support
2	Replace screw, M10 x 70 + M10 x 80 > Initial tightening 50 Nm (36.9 ftlb.) > torque angle + 90°
3	Torque support bracket
4	Screw > Tightening torque 55 Nm (40.6 ftlb.)
5	Screws, M8 x 55 (V6 Turbo M8 x 45) > Tightening torque 23 Nm (17 ftlb.)