LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (26 Exhaust System 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 261420 Removing And Installing Heat Shields >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. For heat shields on centre tunnel:

    Remove exhaust system.

    > 260119 REMOVING AND INSTALLING EXHAUST SYSTEM 

  2. For heat shields on rear bumper:

    Remove rear apron.

    > WM, 635519 REMOVING AND INSTALLING REAR APRON (Coupe) , WM, 635519 REMOVING AND INSTALLING REAR APRON (Wagon)

  3. For heat shield on rear silencer:
    1. 3.1 Remove exhaust system.

      > 260119 REMOVING AND INSTALLING EXHAUST SYSTEM 

    2. 3.2 Remove heat insulation at the centre, luggage compartment pan -1-  .
      1. 3.2.1 Unscrew screws -2-  and nuts -3-  .
      2. 3.2.2 Remove heat insulation at the centre, luggage compartment pan -1-  .
        G15878136Courtesy of PORSCHE CARS NORTH AMERICA, INC.

        Heat insulation at the centre, luggage compartment pan