LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (26 Exhaust System 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 261420 Removing And Installing Heat Shields >> Installing Heat Shields >> Installing Heat Shield On Centre Tunnel

Installing Heat Shield On Centre Tunnel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heat shield on centre tunnel.
    1. 1.1 Move heat shield for centre tunnel -3 to 5-  into installation position.
    2. 1.2 Fit and tighten nuts -1-  and screws -2-  .

      Nuts -1-  > Tightening torque 2.5 Nm (1.75 ftlb.) 

      Screws -2-  > Tightening torque 2.5 Nm (1.75 ftlb.) 

      G15878139Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Heat shields on centre tunnel

scientia non olet · About LEMON Manuals