LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (26 Exhaust System 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 261219 Removing And Installing Heat Shield For Turbocharger (V6 Turbo) >> Installing Heat Shield For Turbocharger

Installing Heat Shield For Turbocharger

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heat shield for turbocharger.
    1. 1.1 Tighten screws to > Tightening torque 9 Nm (6.5 ftlb.)  
    2. 1.2 Tighten ball pin to > Tightening torque 4.8 Nm (3.5 ftlb.)  
scientia non olet · About LEMON Manuals