LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (24 Fuel System - Electronic Injection 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 249019 Removing And Installing Fuel Line (High-Pressure, Right) (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch off ignition and remove ignition key.
  2. Remove strut.

    > WM, 408619 REMOVING AND INSTALLING STRUT (A-STRUT)

  3. Remove engine cover (design cover).

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER)

  4. Loosen torque support at the bracket and swivel it upwards.

    > 103719 REMOVING AND INSTALLING TORQUE SUPPORT

  5. Remove torque support bracket.
    1. 5.1 Unscrew screws -2-  and -3-  and loosen and guide out bracket for torque support -1-  .
      G15878092Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Torque support bracket

scientia non olet · About LEMON Manuals