Installing Fuel Line (High-Pressure, Right)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Check fuel line for damage following removal and replace it if necessary.

Coat the thread of the union nuts with Microgleit DF 977S. Observe a drying time of at least 5 minuets before fitting.

Install fuel line -1- .

2.1 Guide in fuel line -1- and fit union nuts -2- and -3- by hand.
2.2 Screw in and tighten screw -4- > Tightening torque 9 Nm (6.6 ftlb.)

2.3 Tighten union nuts -2- and -3- using > V.A.G 1331/6 - open-jawed wrench insert, a/f 17 .

> tightening torque of 10 Nm (7.4 ftlb.)

> Torque angle 60°

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install fuel line

The remaining installation steps are performed in reverse order.