LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (24 Fuel System - Electronic Injection 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 247319 Removing And Installing Oxygen Sensor Downstream Of Catalytic Converter (V6 BITURBO) >> Installing Oxygen Sensor Downstream Of Catalytic Converter >> Installing Oxygen Sensor Downstream Of Catalytic Converter On Cylinder Bank 2

Installing Oxygen Sensor Downstream Of Catalytic Converter On Cylinder Bank 2

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install oxygen sensor downstream of primary catalytic converter on cylinder bank 2 -1-  .
    1. 1.1 Grease thread of oxygen sensor -1-  with hot screw paste before installation.
      1. 1.1.1 Make sure that the paste does not get into the slits in the sensor body.
    2. 1.2 Carefully screw in and tighten oxygen sensor -1-  .

      > Tightening torque 52 Nm (38 ftlb.) 

    3. 1.3 Route line -2-  .
      1. 1.3.1 Clip line -2-  into the cable clamps.
    4. 1.4 Connect electric plug connection -4-  in the engine compartment.
      G15878089Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Oxygen sensor, cylinder bank 2

scientia non olet · About LEMON Manuals