Installing DME Control Unit
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for screws securing DME control unit holder to bracket: > Tightening torque 2.8 Nm (2 ftlb.) +/-20 %
Tightening torque for screws securing DME control unit to holder: > Tightening torque 5.6 Nm (4 ftlb.) + 10 % - 15 %