Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws on high-pressure pump | m8 x 25 | Initial tightening | 20 Nm (14.8 ftlb.) | ||
| Fastening screws on high-pressure pump | Final tightening | + 45° | |||
| Low-pressure fuel line on distributor | Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. Coat | Tightening torque | 8 Nm (5.9 ftlb.) | ||
| Fuel line low-pressure distributor | Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. | Tightening torque | 60° | ||
| Fastening screw securing heat shield to high-pressure pump | M6 x 12 | Tightening torque | 8 Nm (5.9 ftlb.) | ||
| Fastening screw securing heat shield to high-pressure pump | M6 x 25 | Tightening torque | 8 Nm (5.9 ftlb.) |