Installing Left Throttle Housing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

During installation, make sure that the clamp -2- is positioned correctly on the charge air hose -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Charge air hose

Installation is performed in reverse order. Pay particular attention to the following Replace sealing ring and clean the sealing face.
Tightening torque for clamp securing charge air hose to turbocharger: > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.)

Tightening torque for clamp securing charge air hose to pressure pipe on throttle housing: > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.)

Tightening torque for screws securing pressure pipe to throttle housing: > Tightening torque 8 Nm (6 ftlb.)

Tightening torque for screws on throttle housing: > Tightening torque 7 Nm (5 ftlb.)