LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (24 Fuel System - Electronic Injection 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 242519 Removing And Installing Air Cleaner Housing >> Installing Air Cleaner Housing

Installing Air Cleaner Housing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws securing air cleaner housing to carrier module > Tightening torque 4.5 Nm (3.25 ftlb.) 

    Tighten screw-type clamps securing air-cleaner cowl to air cleaner > Tightening torque 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals