LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (24 Fuel System - Electronic Injection 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 240919 Removing And Installing Fuel Pressure Sensor (High-Pressure Sensor) (V6 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position upper part of plenum panel at the right -2-  and screw in and tighten screw -1-  > Tightening torque 4 Nm (3 ftlb.) +/- 15 % 
    G15877964Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing upper part of plenum panel at the right

  2. Install the cowl panel cover.

    > WM, 508719 REMOVING AND INSTALLING COWL PANEL COVER

  3. Install plenum panel cover.

    > WM, 852219 REMOVING AND INSTALLING PLENUM PANEL COVER COUPE or WM, 852219 REMOVING AND INSTALLING PLENUM PANEL COVER WAGON

scientia non olet · About LEMON Manuals