LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (24 Fuel System - Electronic Injection 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 240919 Removing And Installing Fuel Pressure Sensor (High-Pressure Sensor) (V6 BITURBO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove plenum panel cover.

    > WM, 852219 REMOVING AND INSTALLING PLENUM PANEL COVER COUPE or WM, 852219 REMOVING AND INSTALLING PLENUM PANEL COVER WAGON

  2. Remove cowl panel cover.

    > WM, 508719 REMOVING AND INSTALLING COWL PANEL COVER

  3. Unscrew screw -1-  and move upper part of plenum panel at the right -2-  with connected lines aside.
    G15877961Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Moving upper part of plenum panel at the right aside

scientia non olet · About LEMON Manuals