LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (40 Wheel Suspension Front Drive Shaft 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 408619 Removing And Installing Strut (Dome Strut) >> Installing Strut (Dome Strut)

Installing Strut (Dome Strut)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install strut (dome strut) -1-  .
    G15859101Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Strut (dome strut)

    1. 1.1 Position strut (dome strut) -1-  .
    2. 1.2 Insert new screws -3-  .
    3. 1.3 Fit and tighten new nuts -2-  holding them against the screws -3-  .

      > Initial tightening 50 Nm (37 ftlb.) 

      > Final tightening + 90° 

  2. Install side struts -4-  .
    G15859102Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for side strut

    1. 2.1 Tighten new screws -5-  . >Initial tightening 20 Nm (15 ftlb.)  > Final tightening + 90° 
    2. 2.2 Tighten -6-  screws. >Tightening torque 20 Nm (15 ftlb.) 
  3. Clip in -1-  sensor -3-  and hoses -2-  to holder -Arrow-  .
G15859103Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sensor on side strut