LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (27 Starter, Power Supply, Cruise Control 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 27921902 Removing And Installing Temperature Sensor >> Installing Temperature Sensor

Installing Temperature Sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten  new fastening screw on inner temperature sensor holder to > Tightening torque 6 Nm (4.4 ftlb.)  .

    Tighten  new fastening screw on outer temperature sensor holder to > Tightening torque 6 Nm (4.4 ftlb.)  .

    Tighten screws on heat shield to > Tightening torque 8 Nm (5.9 ftlb.)  .

    Electric plug connection must engage securely.

scientia non olet · About LEMON Manuals