Removing Electric Motor With DECOUPLER
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Incorrect handling of high-voltage components
- Electric shock
- Short circuit
- Fire
- Explosion
→ Only appropriately trained and authorized persons may work on high-voltage vehicles and components.
→ Required qualification: High voltage technician or high voltage expert.
→ Observe national requirements and legislation for this work.
→ Always use insulated tools, such as an > VAS 6883 - insulated tool set when working on these parts. Observe general warning notices for working on the high-voltage system.
→ > 2X00IN GENERAL WARNING NOTICES FOR WORKING ON THE HIGH-VOLTAGE SYSTEM
CAUTION:
Heavy components
- Risk of squashing
→ Wear personal protective gear.
→ Get someone to help if necessary.
NOTE:
Incorrect handling of components
- Risk of damage to components
→ Carefully remove and install component.
Information
- Get one or more people to help when installing/removing heavy or difficult-to-reach components.
- This will prevent or reduce the risk of possible damage.
- Unscrew fastening screws on electric motor in the following sequence -14, 13, 12, 11, 10, 9, 8, 7-
.
Screw-in sequence on transmission side
- Unscrew fastening screws on electric motor in the following sequence -6, 5, 4, 3, 2, 1-
.
Screw-in sequence on engine side
Information
The help of another person is required.
- Lift off electric motor -1-
.
- 3.1 Secure two > 9700 - transport eyebolts -2- to the electric motor -1- .
- 3.2 On > 9700 - transport eyebolts -2- , engage the carabiner hooks -3- of the > 3033 - lifting tackle .
- 3.3 Lift up electric motor -1-
using > VAS 6100 - Workshop Crane -4-
while the other person guides the electric motor -1-
along.
Electric machine