LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (27 Starter, Power Supply, Cruise Control 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 270519 Removing And Installing Battery Sensor >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance Tolerance
Left and right boot pan cover screws Item 2 Tightening torque 1.5 Nm (1.1 ftlb.)    
G15878208Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws for luggage compartment
cover        
Nut for battery ground terminal   Tightening torque 3.5 Nm (2.5 ftlb.)    
Cap nut securing ground line/battery sensor to body   Tightening torque 15 Nm (11 ftlb.)    


Location Description Type Basic value Tolerance Tolerance
Fastening nut securing positive cable to body -1- Tightening torque 10 Nm (7.5 ftlb.)    
G15878213Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing battery sensor
         
Terminal clamp to battery -1-, -2- Tightening torque 6 Nm (4.5 ftlb.)    
G15878214Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Attaching terminal clamps
         
external current supply charging device current 90 A