LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (27 Starter, Power Supply, Cruise Control 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 270519 Removing And Installing Battery Sensor >> Removing Battery Sensor

Removing Battery Sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. → Switch off ignition and remove remote control (hand-held transmitter).
  2. Disconnect ground strap with battery sensor -1-  from the battery.

    > 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY

    G15878209Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unscrewing ground strap

  3. Loosen screws on cover strip -1-  and remove cover strip.
    G15878210Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing cover strip

  4. Release and disconnect electric plug connection -5-  on the battery sensor.
    G15878211Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing and pulling off electric plug connection

  5. Unscrew nut -6-  and remove ground strap with battery sensor -1-  .
    G15878212Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing battery sensor



NOTE: Voltage peaks 
  • Risk of damage to electrical load or to the control unit 

    → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

    → Switch off electrical loads before disconnecting or removing them.

  1. Disconnect ground terminal with battery sensor -1-  from the battery.

    > 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY

    G15878215Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Ground terminal

  2. Release and disconnect electric plug connection -1-  on the battery sensor.
    G15878216Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection

  3. Unscrew fastening nut -1-  and remove ground line with battery sensor -2-  .
    G15878217Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening nut