LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (39 Final Drive Differential, Differential Lock 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 397519 Removing And Installing Control Unit For Rear-Differential Lock >> Removing Control Unit For Rear-Differential Lock >> Installing Control Unit For Rear-Differential Lock

Installing Control Unit For Rear-Differential Lock

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws for control unit for rear-differential lock: > Tightening torque 3 Nm (2 ftlb.) 

    Tightening torque for screws on cover: > Tightening torque 1.5 Nm (1.1 ftlb.)