LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (39 Final Drive Differential, Differential Lock 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 390119 Removing And Installing Final Drive >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Drive shaft protective plate to rear axle housing (right with TPM control unit holder) Item 2: Hexagon roundhead bolt M6 x 12 Tightening torque 8 Nm (5.9 ftlb.)    
G15888805Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for protective plate for drive shaft
         
Final drive to rear axle housing Item 2: Hexagon-head bolt M12 x 95 Initial tightening 60 Nm (44.3 ftlb.)    
G15888806Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Final drive mounting
         
Final drive to rear axle housing Item 2: Hexagon-head bolt M12 x 95 Final tightening torque angle + 90°    
G15888807Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Final drive mounting
         
Support to rear axle housing Item 2: Hexagon-head bolt M12 x 40/Always replace bolts after removal! Initial tightening 70 Nm (51.6 ftlb.)    
G15888808Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for support
         
Support to rear axle housing Item 2: Hexagon-head bolt M12 x 40/Always replace bolts after removal! Final tightening torque angle + 90°    
G15888809Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for support