LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (13 Engine - Crank Drive, Pistons 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 138519 Removing And Installing Balance Shaft (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screw for balance weight Replace following removal. Initial tightening 40 Nm (30 ftlb.)    
Screw for balance weight Replace following removal. Torque angle + 90°    
Screws for balance shaft end plate   Tightening torque 9 Nm (6.5 ftlb.)    
scientia non olet · About LEMON Manuals