LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (13 Engine - Crank Drive, Pistons 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 138519 Removing And Installing Balance Shaft (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install balance shaft bracing wheel.

    > 138019 REMOVING AND INSTALLING BALANCE SHAFT BRACING WHEEL 

  2. Fit new screw -1-  on balance weight -2-  .
    1. 2.1 Get another person to counter the crankshaft if necessary.
    2. 2.2 Counter the crankshaft using > T40049 - special wrench  , fit new  screw -1-  and tighten to > Initial tightening 40 Nm (30 ftlb.)  and > Torque angle + 90°  .
      G15822160Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Balance weight screw

  3. Install crankcase cover.

    > 101419 REMOVING AND INSTALLING CRANKCASE COVER (V6 TURBO)