LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (13 Engine - Crank Drive, Pistons 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 137819 Removing And Installing Drive Belt (V6) >> Removing Drive Belt >> Removing Drive Belt For Air-Conditioning Compressor

Removing Drive Belt For Air-Conditioning Compressor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use chalk or a felt-tip pen to mark the rolling direction of the drive belt for the air-conditioning compressor for re-installation.
  2. Slacken drive belt for air-conditioning compressor.
    1. 2.1 Remove cover on the tensioning device.
    2. 2.2 Loosen screw -1-  by 1-1/2 turns.
    3. 2.3 To slacken the drive belt, swivel the tensioning device clockwise using a TORX T55 socket wrench -arrow A-  .
    4. 2.4 Remove the drive belt.
G15822145Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening drive belt for air-conditioning compressor

scientia non olet · About LEMON Manuals