Removing Crankshaft Vibration Damper (V6 Turbo)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit counterhold tool T40330/1.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Counterhold tool T40330 on vibration balancer
1. 1.1 Turn the crankshaft so that counterhold tool T40330/1 can be fitted.
2. 1.2 Fit adapter T40330/4 -2- to the crankshaft vibration damper using counterhold tool T40330/1 -4- .
3. 1.3 Fit spacer sleeve T40330/3 -3- underneath, then fit and tighten screw -Arrow- .
  > Tightening torque 23 Nm (17 ftlb.)
4. 1.4 Loosen and unscrew screw -1- .
Remove counterhold tool T40330/1 .
Remove crankshaft vibration damper.