LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (13 Engine - Crank Drive, Pistons 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 134819 Removing And Installing Crankshaft (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sprocket for oil pump.

    > Removing and installing oil pump (V6 Turbo) 

  2. Install crankcase cover.

    > Removing and installing crankcase cover (V6 Turbo) 

  3. Install pistons.

    > Removing and installing pistons (V6 Turbo) 

  4. Install timing chain.

    > Removing and installing timing chain (V6 Turbo) 

  5. Install engine.

    > Removing and installing engine 

  6. Loosen engine from assembly support.

    > Securing engine on assembly support (V6 Turbo) 

  7. Fill in engine oil.

    > Draining and filling engine oil