LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screws for cylinder head cover on right cylinder bank Replace following removal. Initial tightening 8 Nm (6 ftlb.)    
Screws for cylinder head cover on right cylinder bank Replace following removal. Torque angle + 90°    
Screws for cylinder head cover on left cylinder bank Replace following removal. Initial tightening 8 Nm (6 ftlb.)    
Screws for cylinder head cover on left cylinder bank Replace following removal. Torque angle + 90°    
Screw for stopper on camshaft   Tightening torque 9 Nm (6.5 ftlb.)    
Vacuum line holder M6 screw Tightening torque 9 Nm (6.5 ftlb.)