Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Only for installing cylinder head cover on right cylinder bank:
1. 1.1 Install tank vent valve.
  > Removing and installing tank vent valve (V6 monoturbo)
2. 1.2 Install the high-pressure pump.
  For V6 biturbo:
  
  > Removing and installing high-pressure pump (V6 biturbo)
  
  For V6 monoturbo:
  
  > Removing and installing high-pressure pump

Fit holder for solenoid valves -1- .

2.1 Fit holder -1- .
2.2 Screw on nuts on holder -3- and tighten to > Tightening torque 9 Nm (6.5 ftlb.) .

2.3 Insert solenoid valves -2- in holder -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for solenoid valves

Only for installing cylinder head cover on left cylinder bank:
1. 3.1 Install oil mist separator.
  > Removing and installing oil mist separator (V6 Turbo)
2. 3.2 Install brake booster vacuum pump.
  > Removing and installing brake booster vacuum pump
Insert lower part of sound insulation.
Fit main wire harness in engine compartment.
> Loosening and securing main wire harness in engine compartment
Install solenoid hydraulic valves for valve lift adjustment.
> Removing and installing solenoid hydraulic valve for valve lift adjustment (V6 Turbo)
Install fuel injectors.
> Removing and installing fuel injector
Fit timing chain on the camshafts.
> Removing and installing timing chain (V6 Turbo)