LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove timing chain from the camshafts.

    > Removing and installing timing chain (V6 Turbo) 

  2. Remove fuel injectors.

    > Removing and installing fuel injector 

  3. Remove solenoid hydraulic valves for valve li adjustment.

    > Removing and installing solenoid hydraulic valve for valve lift adjustment (V6 Turbo) 

  4. Loosen main wire harness in engine compartment and move it aside.

    > Loosening and securing main wire harness in engine compartment 

  5. Only for removing cylinder head cover on right cylinder bank: 
    1. 5.1 Remove tank vent valve.

      > Removing and installing tank vent valve (V6 monoturbo) 

    2. 5.2 Remove the high-pressure pump.

      For V6 biturbo: 

      > Removing and installing high-pressure pump (V6 biturbo) 

      For V6 monoturbo: 

      > Removing and installing high-pressure pump 

  6. Remove holder for solenoid valves -1-  .
    1. 6.1 Pull solenoid valves -2-  off the holder -1-  and set them aside.
    2. 6.2 Unscrew nuts on holder -3-  .
    3. 6.3 Remove holder -1-  .
      G15822326Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Holder for solenoid valves

  7. Only for removing cylinder head cover on left cylinder bank: 
    1. 7.1 Remove oil mist separator.

      > Removing and installing oil mist separator (V6 Turbo) 

    2. 7.2 Remove brake booster vacuum pump.

      > Removing and installing brake booster vacuum pump 

  8. Remove lower part of sound insulation.