LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 157019 Removing And Installing Cylinder Head >> Removing Cylinder Head >> Removing Cylinder Head (Right Cylinder Bank)

Removing Cylinder Head (Right Cylinder Bank)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove additional coolant pump.
    1. 1.1 Unscrew screws on coolant line holder -1-  .
    2. 1.2 Unscrew screw on coolant flange -2-  and pull off the flange.
    3. 1.3 Remove additional coolant pump with coolant lines.
    G15822314Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Additional coolant pump

  2. Remove side coolant pipe -1-  by unscrewing screw -2-  and removing coolant pipe.
    G15822315Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Side coolant pipe on right cylinder bank

  3. Remove front coolant pipe -1-  by unscrewing screw -2-  and removing coolant pipe.
    G15822316Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front coolant pipe on right cylinder bank

  4. Remove cylinder head.
    1. 4.1 Unscrew screws on cylinder head in the sequence -10 to 1-  .
    2. 4.2 Remove cylinder head.
Fig 1: Cylinder Head Screws Loosening Sequence
G15822317Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing cylinder head on right cylinder bank