Removing Valve Lifters (Hydraulic Tappets)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Observe the most important working regulations and warning notes
> The most important working regulations and warning notes

If you intend to re-use hydraulic tappets, safety clips and valve levers:
Mark allocation of the components using a coloured marker.
Remove hydraulic tappet -1- and valve lever -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Hydraulic tappet with valve lever in cylinder head
1. 2.1 Take hydraulic tappet -1- with valve lever -2- out of the cylinder head together.
  Information
  
  If you intend to re-use hydraulic tappets and valve levers, check that the components are not damaged.
2. 2.2 Check component allocation and check that all components are fitted.
Remove hydraulic tappet -2- from valve lever -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Hydraulic tappet
1. 3.1 Open safety clip -1- carefully.
2. 3.2 Remove safety clip -1- and hydraulic tappet -2- .