LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V6 Turbo) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment

Removing Solenoid Hydraulic Valve For Valve Lift Adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The steps described here are shown on the right cylinder bank, but also apply for the opposite side.

  1. Lift up moulded part -3-  .
    1. 1.1 For better access, release and disconnect plug connections for ignition coils -1-  .
    2. 1.2 Release and disconnect electric plug connections for solenoid hydraulic valves for valve lift adjustment -2-  .
    3. 1.3 Lift up moulded part -3-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15822272Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Moulded part

  2. Remove solenoid hydraulic valve for valve lift adjustment -2-  .
    1. 2.1 Unscrew screws on solenoid hydraulic valve for valve lift adjustment -1-  .
    2. 2.2 Remove solenoid hydraulic valve for valve lift adjustment -2-  .
G15822273Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment