LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V6 Turbo) >> Installing Solenoid Hydraulic Valve For Valve Lift Adjustment

Installing Solenoid Hydraulic Valve For Valve Lift Adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace O-ring on solenoid hydraulic valve for valve lift adjustment.
    2. 1.2 Tighten screws for solenoid hydraulic valve for valve lift adjustment to > Initial tightening 3 Nm (2 ftlb.)  and > Torque angle + 90°  .
scientia non olet · About LEMON Manuals