LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 154719 Removing And Installing Guide And TENSIONING Rails (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Bearing pins for tensioning rail for left cylinder bank   Tightening torque 23 Nm (17 ftlb.)    
Screws on guide rail for left cylinder bank   Tightening torque 9 Nm (6.5 ftlb.)    
Bearing pins for guide rail for right cylinder bank Replace following removal. Initial tightening 5 Nm (3.5 ftlb.)    
Bearing pins for guide rail for right cylinder bank Replace following removal. Torque angle + 45°    
Bearing pins for tensioning rail for right cylinder bank   Tightening torque 23 Nm (17 ftlb.)