Installing Camshaft Controller Actuator
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Dirt and contamination
- Risk of damage to units or components
→ Protect components from dirt and contamination.
→ Clean or replace dirty components.
- Installation is performed in reverse order. Pay particular attention to the following:
Replace sealing ring on camshaft controller actuator.
Screw for camshaft controller actuator > Tightening torque 9 Nm (6.5 ftlb.)
Nut for coolant pipe holder, top: > Tightening torque 9 Nm (6.6 ftlb.)
Screw for coolant pipe holder, bottom: > Tightening torque 8 Nm (6 ftlb.)