Installing Bypass Flap Control Box

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

Install pressure unit.
1. 1.1 Position pressure unit with adjustable control rod on the turbocharger.
2. 1.2 Fit and tighten nuts -Arrows- .
  > Tightening torque 8 Nm (6 ftlb.)
3. 1.3 Press ball socket -1- onto the ball pin of the actuating lever
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adjustable control box