Installing Pressure Pipe

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Install pressure pipe -1- at the turbocharger.

1.1 Connect electric connector for temperature sensor -2- .

1.2 Tighten screws -3- to > Tightening torque 9 Nm (6.5 ftlb.) .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure pipe on turbocharger

Secure hoses -1- and -2- on the pressure pipe -3- .
1. 2.1 Fit connecting hose -1- on the pressure pipe and tighten screw-type clamp -4- to > Tightening torque 3.5 Nm (2.5 ftlb.) .
2. 2.2 Fit pressure hose -2- on the pressure pipe and tighten screw-type clamp -5- to > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.) .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure hose from turbocharger to charge-air cooler