LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (21 Exhaust Gas Turbocharging 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 213019 Removing And Installing Turbocharger (V6 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect oxygen sensor upstream of catalytic converter.

    > WM, 246919 REMOVING AND INSTALLING OXYGEN SENSOR UPSTREAM OF CATALYTIC CONVERTER (V6 BITURBO)

  2. Remove heat shield for turbocharger.

    > WM, 261219 REMOVING AND INSTALLING HEAT SHIELD FOR TURBOCHARGER (V6 TURBO)

  3. Disconnect pressure pipe at the turbocharger.

    > 214119 REMOVING AND INSTALLING PRESSURE PIPE (V6 BITURBO) 

  4. Disconnect intake pipe at the turbocharger.

    > 212419 REMOVING AND INSTALLING INTAKE MANIFOLD (V6 BITURBO) 

  5. Remove the engine cover.

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 BITURBO)

  6. Check engine coolant level.

    > 190101 CHECKING COOLING SYSTEM

  7. Checking engine-oil level.

    > 170101 CHECKING ENGINE OIL