Installing Turbocharger

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

For more information, see Porsche Spare Parts Information.

If the turbocharger is replaced, parts must also be added and retrofitted.
Information

When removing the turbocharger, the oil return line will be damaged and must always be replaced following removal.
Replace oil return line -1- for turbocharger.
1. 2.1 Remove oil line -1- from the crankcase.
2. 2.2 Remove pin -2- from the turbocharger.
3. 2.3 Secure new oil line with pin on the turbocharger.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Replacing oil return line for turbocharger
Install turbocharger -1- .
1. 3.1 Replace seal on cylinder head/turbocharger flange.
2. 3.2 Replace O-rings on active carbon filter line.
3. 3.3 Secure active carbon filter line -3- and tighten screw -2- to > Tightening torque 9 Nm (6.5 ftlb.) .
4. 3.4 Move turbocharger -1- into installation position.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Active carbon filter line on turbocharger
Secure turbocharger -1- .
1. 4.1 Screw in stud -3- and tighten to > Tightening torque 15 Nm (11 ftlb.) .
2. 4.2 Tighten nuts -2- to > Tightening torque 25 Nm (5 ftlb.) .
3. 4.3 Tighten nuts -4- to > Tightening torque 30 Nm (22 ftlb.) .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for right turbocharger
Fasten new V-band clamp -1- .
1. 5.1 Replace turbocharger/catalytic converter seal.
2. 5.2 Tighten screw -2- to > Tightening torque 7 Nm (5 ftlb.) .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

V-band clamp on turbocharger/catalytic converter flange
Secure coolant lines -1- and -2- on the turbocharger.
1. 6.1 Replace O-rings.
2. 6.2 Tighten screws -3- to > Tightening torque 9 Nm (6.5 ftlb.) .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant lines on right turbocharger
Secure oil supply line -1- .
1. 7.1 Replace O-rings.
2. 7.2 Tighten screw -2- to > Tightening torque 9 Nm (6.5 ftlb.) .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil line on right turbocharger
Connect electric connector -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric connector for turbocharger shut-off valve
Push vacuum hose onto the turbocharger vacuum unit.