LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (21 Exhaust Gas Turbocharging 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 212419 Removing And Installing Intake Manifold (V6 BITURBO) >> Removing Intake Manifold >> Removing Left Intake Pipe

Removing Left Intake Pipe

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect front wiring harness -1-  .
    1. 1.1 Loosen tie-wrap -2-  on the holder.
    2. 1.2 Loosen holder -3-  for wiring harness on the pressure pipe -4-  at the left and right.
      G15877322Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Front wiring harness

  2. Disconnect positive crankcase ventilation line -1-  .
    1. 2.1 Release and pull off line -1-  on the oil separator -2-  .
    2. 2.2 Loosen holder -3-  from the line.
    3. 2.3 Release and pull off line -1-  on the intake-air distributor at the left -3-  and right -4-  .
    G15877323Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Positive crankcase ventilation line

  3. Remove intake manifold -1-  .
    1. 3.1 Loosen screw-type clamp -2-  .
    2. 3.2 Unscrew screws -3-  .
    3. 3.3 Pull intake pipe -1-  with positive crankcase ventilation line -4-  under the wiring harness -5-  forward and remove it.
    G15877324Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Left intake pipe

scientia non olet · About LEMON Manuals