LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (21 Exhaust Gas Turbocharging 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 212419 Removing And Installing Intake Manifold (V6 BITURBO) >> Installing Intake Manifold

Installing Intake Manifold

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install intake manifold.
    1. 1.1 Check intake manifold seal and replace it if damaged.
    2. 1.2 Tighten screws securing intake manifold to turbocharger to > Tightening torque 9 Nm (6.5 ftlb.)  .
    3. 1.3 Tighten screw-type clamp to > Tightening torque 3.5 Nm (2.5 ftlb.)  .
  2. Further installation is performed in reverse order.
scientia non olet · About LEMON Manuals