Removing Control Unit For Tyre Pressure Monitoring (TPM)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.

Release and disconnect electric plug connection -2- on the TPM control unit -1- .
Unscrew screws -3- and remove TPM control unit -1- with holder.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrewing screws
Unclip TPM control unit -1- from the holder -4- (-arrow- ) and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing control unit for Tyre Pressure Monitoring (TPM)