LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (44 Wheels, Tyres, Suspension Alignment 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 443219 Removing And Reinstalling Wheel Electronics >> Removing And Reinstalling Wheel Electronics >> Removing Wheel Electronics

Removing Wheel Electronics

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Installation position: The wheel electronics unit is located on the valve in the outer rim base.

G15858247Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of wheel electronics

  1. Loosen screw -1-  for the wheel electronics unit. If necessary, counter in the bore at the valve foot using a suitable assembly pin (for example, steel pin Ø approx. 1.8 mm).
    G15858248Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wheel electronics mounting

  2. Undo the union nut and take out the valve.