Installing Oil Pump
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Fit new seal on oil pump.
- 1.2 Replace screws for oil pump and screw for sprocket at the oil pump.
- 1.3 Tighten screws for oil pump to > Initial tightening 8 Nm (6 ftlb.) > Final tightening + 90° .
- 1.4 Tighten screw securing sprocket to oil pump to > Initial tightening 20 Nm (15 ftlb.) and > Final tightening + 90° .