LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (17 - Engine - Lubrication 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 170519 Removing And Installing Oil Pressure Switch (V6 Turbo) >> Installing Oil Pressure Switch

Installing Oil Pressure Switch

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install oil pressure switch -2-  .
    1. 1.1 Replace sealing ring on oil pressure switch -2-  .
    2. 1.2 Screw in oil pressure switch -2-  and tighten to > Tightening torque 20 Nm (15 ftlb.)  .
    G15822386Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Oil pressure switch

  2. Connect and lock electric plug connection -1-  on the oil pressure switch -2-  .
    G15822387Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection on oil pressure switch

  3. Fit heat protection -2-  and electric plug connection -1-  .
    1. 3.1 Slide heat protection -2-  over electric plug connection on the oil pressure switch.
    2. 3.2 Connect and lock electric plug connection -1-  .
    G15822388Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Heat protection on oil pressure switch