LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (17 - Engine - Lubrication 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 170419 Removing And Installing Oil-Pressure Sender (V6 Turbo) >> Installing Oil-Pressure Sender

Installing Oil-Pressure Sender

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace seal.
    2. 1.2 Screw in new oil-pressure sender using > 9594 - socket-wrench insert  and tighten to > Initial tightening 3 Nm (2 ftlb.)  > Final tightening + 45°  .
scientia non olet · About LEMON Manuals